VDIAGTOOL V210 Automotive Circuit Tester Circuit Wire Tracker Tracers Analyzer 6-42V Short Open Finder Checker Car Repair Cable

【OPEN & SHORT CIRCUIT FINDER &TRCING WIRE】

VDIAGTOOL V210 automotive open & short finder circuit tester powered by 2pcs 9V batteries performs easily

locating the circuit breaker point, open connections, broken wires, current leaks with tone change, even trace

wire/cable without damaging the insulation. This is a convenient and efficient circuit instrument for DIYers,

electricians, and technicians, to simply and quickly judge the continuity of the cables/wire and diagnose the breaker

point.

【LOCATING BREAKER POINT EFFICIENTLY】

V210 circuit breaker finder tool comes with transmitter and receiver LEDs showing open or short circuit conditions.

The Built-in buzzer sound of the signal receiver helps you immediately and easily locate open connections, broken

wires, current leaks, and even trace wires.

【CHECKING SHORT CIRCUIT】

V210 Automotive Short Circuit Finder allows you to find intermittent circuit problems by flexing wires or connectors

and listening for a change in the receiver tone without damaging the insulating layer. Receiver with adjustable

sensitivity via knob and flexible 7” Probe for reaching Wires in Congested Places making it easy and fast to locate

short circuits.

【WIDE COMPATIBILITY】

V210 circuit breaker finder tool works on all kinds of vehicle circuit issues such as those found in car, SUV, mini van, truck, tractor, boat &

RV, with voltages between 6 and 42 volt DC. This automotive short circuit finder makes it easier and quicker to judge continuity of the

cables or wore and find short or break point.

【1 YEAR WARRANTY, 24/7 TECH SUPPORT, 60 DAYS NO QUESTION ASKED RETURN/REFUND】

We offer 1 Year Warranty, Lifetime technical support, 60 Days No-Question-asked NEW REPLACEMENT OR REFUND. Any questions or

concerns, please reach us .

How to use the Probe of VDIAGTOOL V210?

The Short Circuit Finder is equipped with an adjustable 7" supple probe, providing flexibility to reach difficult areas.

This feature makes this product a must-have for professionals and DIY enthusiasts alike.

The receiver's probe is constructed with coiled steel and can be flexed as necessary to access wires in crowded or

challenging spaces. Depending on the circuit's characteristics and sensitivity set-tings, the probe will detect signals

from the wire in various positions. For optimal results, position the receiver's probe tip (black cap) perpendicular (at

90 degrees) to the wire being traced, either above or below it.

Locate Open Circuits

Open Wire Detector instantly detects and alerts you to open circuits. Easily locate short circuits, broken wires, open connections, current leaks, and

trace wires. Transmitter and receiver LEDs indicate open or short circuit conditions.

This Automotive Short and Open Finder, car repair tool is designed to identify and trace wires or cables without damaging the insulation. You can

also use it in checking for short circuit and locating open circuit and so on.

Auto circuit tracer

Easy to use by just simply connect the transmitter in series with the circuit or wire under test, (i.e.: in place of a

blown fuse, across a connector, in series with an open wire, a light bulb socket, etc.), and scanning the circuit/wire

with the tracers flexible probe to find the trouble spot.

Cable Tracking steps are as follows:

1.Dial the switch on the transmitter to the "TONE" position.

2.Connect the black clip of the transmitter to the positive terminal of the car battery. Fuse sockets, connectors, etc.

are also ideal access points. Connect the red clip to the cable being tracked.

3. Turn the sensitivity knob of the receiver clockwise to the middle position, hold down the "TEST" button, and move

the receiver close to the cable and along the line. At this time, an audio sound is emitted on the receiver, and the

cable is tracked according to the sound of the receiver.

Check Short Circuits

Automotive Short Circuit Finder allows you to identify intermittent circuit problems by flexing wires or connectors and

listening for changes in the receiver tone. This automotive circuit finder with 6.7-inch flexible probe, It can helps

reach wires in congested places.

Find Short-Circuit Cables steps are as follows:

1. Disconnect all loads and power sources from the tested circuit.

2. Turn the transmitter switch to the "CONT" position and connect the test wire to the tested cable or wire. When the

line resistance is less than 10k ohms, the green indicator light of "CONT" will light up. When the entire load in the

tested line is disconnected, the green light of "CONT" indicates that this pair of tested cables may be short circuited.

Check the Cable Break Point

1. Turn the switch on the transmitter to the "TONE" position.

2. Connect the black clip of the transmitter to the ground cable. Fuse sockets, connectors, etc. are also ideal access

points. Connect the red clip to the cable being tracked.

3, turn on the receiver and turn the sensitivity knob of the receiver clockwise in the middle position. Hold down the

"TEST" button and slowly sweep the receiver over the cable, pipe, etc. When there is an even sound, it indicates

that the cable is normal. If the noise diminishes or stops, it indicates that the probe has swept through a damaged

cable, or that it has crossed a break, break, or damaged connection point in the circuit.

4, where the audio signal stops is the cable break point.