Description
- Hign-concerned Chemical: none
- Package: DIP
- is_customized: Yes
- Model Number: /
- Operating Temperature: /
- Dissipation Power: /
- Supply Voltage: /
- Application: /
- Condition: New
- Type: /
- Brand Name: NoEnName_Null
- Origin: Mainland China
DIY Electronic Kit Small Airplane CD4017 Flow Lamp Welding Practice Electronic Science Assembly Kit Flashing LED PCB
1. Introduction:
It is an airplane flashing LED circuit DIY kit. It can simulate the flashing effect of airplane lights and DIY to create a very artistic desktop decoration. Not only can it be used as a DIY electronic soldering kit, allowing you to better understand circuits and learn how to solder, it can also be used as a very suitable experimental workbench tool.
2. Features:
1>.Simulating aircraft design
2>.Interesting DIY hand welding
3>.Simple and easy to operate
3. Parameters:
1>.LED color: red/green/yellow
2>.Battery type: CR1220
3>. Working temperature: -20℃~85℃
4>.Working humidity: 0%~95%RH
5>. Size (after installation): 110*105*33mm
4.Component list:
1>There is a DIP-16 CD4017BE decimal counter at U2.
2>.1 DIP-8 NE555P timer in U1.
3>.1 DIP-16 IC socket is located at U2.
4>.1 DIP-8 IC socket is located at U1.
5>.1pcs 1Kohm metal film resistor R3.
6>.1pcs 5.1Kohm metal film resistor R2.
7>.1pcs 10Kohm metal film resistor R1.
8>.Three 3mm red LEDs are located at LED1, LED4 and LED7.
9> There are two 3mm green LEDs at LED2 and LED3.
10>.2 3mm yellow LEDs are located at LED5 and LED6.
11>.1x 0.01uF 103 ceramic capacitor at C2.
12>A 10uF electrolytic capacitor at C1.
13>.1 SW power switch.
14>.1 CR1220 lithium battery is at BT1 and BT2.
15>. One CR1220 lithium battery socket is located at BT1 and BT2.
16>.2 PCB circuit boards
5.Application:
1>.Welding skills training
2>.Student school
3>.DIY production
4>.Project design
5>.E-sports
6>.Gift giving
7>.Craft collection
8>.Home decoration
9>.Souvenir collection
10>.Graduation project
11>.Holiday gifts
6. Installation tips:
1>.Users need to prepare welding tools first.
2>.Please wait patiently for the installation to complete.
3>. This kit is a DIY kit and needs to be installed by the user.
4>. The soldering iron cannot contact the component for a long time (1.0 seconds), otherwise the component will be damaged.
5>. Pay attention to the positive and negative poles of the components.
6>.Short circuit is strictly prohibited.
7>. Prioritize installation of complex components.
8>. Make sure all parts are in the correct direction and correct position.
9>. Please wear anti-static gloves or anti-static wrist strap when installing electronic components.
10>. It is strongly recommended to read the installation manual before starting the installation! ! !
